Lincoln Electric POSIMATIC 1E, Инструкция по технике безопасности, эксплуатации и обслуживанию

Страница: 6 / 22

8695 6634 / Q
B-2
POSIMATIC 1E
B - SAFETY INSTRUCTIONS
For general safety instructions, please refer to the specific manual supplied with the equipment.
1 - AIRBORNE NOISE
Please refer to the specific manual supplied with the equipment.
2 - SPECIFIC SAFETY INSTRUCTIONS
The positioner must be placed on flat and sufficiently strong ground.
Before using the machine, make sure that all the guards are in place.
All guard covers must be screwed in.
Only authorised personnel may access electrical cabinets, which must
have locking systems.
Check the state of the electrical cables (supply and controls).
Carry out a dry test run of the rotation movement and make sure the
safety systems are operating correctly.
Do not exceed the tilting and rotating torques which determine the
maximum admissible load (see diagrams on the equipment).
Do not let loads fall hard on the equipment.
Fully tighten the workpiece(s) on the positioner table.