English 12 English
Maintenance
NOTE
Disconnect the power plug and wait at least 5 minutes
before carrying out any maintenance. Maintenance must
be carried out more frequently in heavy operating
conditions.
Carry out the following operations every three (3)
months:
Replace any illegible labels.
Clean and tighten the welding terminals.
Replace damaged gas tubing.
Repair or replace damaged welding cables.
Have specialized personnel replace the power cable
if damaged.
Carry out the following operations every six (6)
months:
Remove any dust inside the generator using a jet of
dry air.
Carry out this operation more frequently when
working in very dusty places.
Handling and transporting the power
source
OPERATOR SAFETY: WELDER’S HELMET - GLOWES
- SHOES WITH HIGH INSTEPS.
THE WELDING POWER SOURCE DO NOT WEIGHT
MORE THAN 25 KG AND CAN BE HANDLED BY THE
OPERATOR. READ WELL THE FOLLOWING
PRECAUTIONS.
The machine is easy to lift, transport and handle, though
the following procedures must always be observed:
The operations mentioned above can be operated by
the handle on the power source.
Always disconnect the power source and
accessories from main supply before lifting or
handling operations.
Do not drag, pull or lift equipment by the cables.
Customer Assistance Policy
The business of The Lincoln Electric Company is
manufacturing and selling high quality welding
equipment, consumables, and cutting equipment. Our
challenge is to meet the needs of our customers and to
exceed their expectations. On occasion, purchasers may
ask Lincoln Electric for advice or information about their
use of our products. We respond to our customers
based on the best information in our possession at that
time. Lincoln Electric is not in a position to warrant or
guarantee such advice, and assumes no liability, with
respect to such information or advice. We expressly
disclaim any warranty of any kind, including any
warranty of fitness for any customer’s particular purpose,
with respect to such information or advice. As a matter of
practical consideration, we also cannot assume any
responsibility for updating or correcting any such
information or advice once it has been given, nor does
the provision of information or advice create, expand or
alter any warranty with respect to the sale of our
products.
Lincoln Electric is a responsive manufacturer, but the
selection and use of specific products sold by Lincoln
Electric is solely within the control of, and remains the
sole responsibility of the customer. Many variables
beyond the control of Lincoln Electric affect the results
obtained in applying these types of fabrication methods
and service requirements.
Subject to Change – This information is accurate to the
best of our knowledge at the time of printing. Please
refer to
www.lincolnelectric.com
for any updated
information.
