Lincoln Electric IDEALARC AC-1200, Руководство пользователя

Страница: 11 / 27

b-1
OPERATION
IDEALARC® AC-1200
b-1
TO SET FOR MACHINE OR REMOTE
CONTROL
The output can be controlled either from the AC-
1200, the wire feeder or other remote locations.
To adjust the current from the wire feeder or other
remote locations, set the toggle switch on the front of
the AC-1200 to ‘Output Control Remote’. To adjust the
output current from the AC-1200, set this switch to
‘Output Control at AC-1200’.
T0 SET THE OUTPUT CURRENT
Start the AC-1200 using the line disconnect switch or
breaker installed with the input wiring. The red pilot
light on the front panel indicates when the welder is
on.
Adjust the output current from minimum to maximum
within the range set by the output stud connections
using either the ‘Output Control’ rheostat on the AC-
1200 (toggle switch set on ‘Panel Control’) or the wire
feeder or other remote rheostat (toggle switch set on
‘Output Control Re-mote’).
TO WELD WITH MANUAL ELECTRODES
Turn the welder off, disconnect the wire feeder leads
and connect a jumper between #2 and #4 on the
AC-1200 terminal strip. This closes the output con-
tactors making the output studs electrically ‘hot’
whenever the machine is on. Adjust the output cur-
rent as described above. Cau-tion: If the wire feeder
electrode cables are left connected to the output
studs, the wire feeder nozzle and electrode will be
electrically ‘hot’.
ELECTRIC SHOCK
can kill.
• Do not touch electrically live parts
or electrode with skin or wet
clothing.
• Insulate yourself from work and
ground.
• Always wear dry insulating
gloves.
FUMES AND GASES
can be dangerous.
• Keep your head out of fumes.
• Use ventilation or exhaust to
remove fumes from breathing
zone.
WELDING SPARKS
can cause fire or
explosion
• Keep flammable material away.
• Do not weld on containers that
have held combustibles.
ARC RAYS
can burn.
• Wear eye, ear and body
protection.
SAFETY PRECAUTIONS
Read and understand this entire section before oper-
ating the machine.
Observe additional Safety Guidelines detailed
throughout this manual.
WARNING