4000 Series Operator Manual
6
The filter includes directional arrows noting the proper direction of “water flow” when installing the filter. The arrows
noting the “water flow” should be pointing in a right-to-left direction when the filter is installed. It is critical to the
operation of this unit that the water filter be installed correctly!
CAUTION:
!
WATER FILTER REPLACEMENT INSTRUCTIONS
NOTE: IT IS RECOMMENDED THAT THE WATER FILTER (PART #4042) BE REPLACED EVERY SIX (6) MONTHS TO ENSURE OPTIMAL
PERFORMANCE OF YOUR FRESH-O-MATIC.
1.
Remove the Filter Fill Tube from the Water Filter by pressing in the Collet Ring. With the Collet Ring depressed, pull tube out from water
filter.
2.
Follow the instructions listed in step 1 with the opposite end of the filter.
3.
Remove Filter Guard from back panel by unscrewing the four screws used in fastening the guard to the back panel.
4.
Insert new filter inside the Filter Guard. Reattach Filter Guard to back panel.
5.
Insert the Filter Exit Tube firmly into the water filter until it stops. Do not push in Collet Ring.
6.
Insert the Filter Fill Tube firmly into the water filter until it stops. Do not push in Collet Ring.
7.
Filter replacement is now complete.
With Collet Ring
pushed in, remove tube
by pulling out of filter
Collet Ring
Location of
Screws
Location of
Screws
