manualshive.com logo in svg

Lince 9582-GOLD-MST-E-EN, Инструкция по установке, эксплуатации и обслуживанию, Страница: 13 / 44

Поделиться
Скачать
Lince 9582-GOLD-MST-E-EN Скачать руководство пользователя страница 13

13

LINCE ITALIA S.p.A.

 

Fig. 14 

Fig. 15 

Enter an administrator code (default code 456) or installer code (default code 123) 

to download the configuration present in the control panel.

Fig. 16 

3.3  FIRST CONNECTION

Select the “Choose communication channel”, click on the menu bar under “System” -> “New” to set the proper serial port. On the first 

screen there is an example of a port choice with Macintosh system, while in the second case with a Windows system.

Fig. 17 

At this point, it is possible to proceed with the connection with the control panel referring to what is reported in the following manual.

In the screen that appears as soon as you are logged in at the bottom right, it is possible to read informations about the access 

privileges and the type of connection is shown. In the example shown, an installer has connected via cable.

The user has connected to the card via cable

The user has connected to the card via Wi-Fi

[INST]

The user has logged in with installer privileges

[AMM]

The user has logged in with administrator privileges

 

Depending on the type of access (administrator or installer) some sections will not be accessible.

Содержание 9582-GOLD-MST-E-EN













































Отзывы:

Нет отзывов