Lince 1673, Техническое руководство, Страница: 13 / 20

13
fig.14
Si raccomanda di diminuire la sensibilità della microonda in rapporto alla distanza di
copertura desiderata.
Adjust the microwave sensibility in relationship to the needed detection range.
IMPOSTAZIONE DIP SWITCH
E
JUMPER DIP SWITCHES
AND
JUMPER SETTING CHART
Dip 1
Off ANTIMASKING
OFF Dip 1
Off ANTIMASKING
OFF
Dip 1
On ANTIMASKING
ON Dip 1
On ANTIMASKING
ON
Dip 2
Off Sensibilità IR
bassa Dip 2
Off IR sensitivity low
Dip 2
On Sensibilità IR
alta Dip 2
On IR sensitivity high
Dip 3
Dip 4
Off Off Microonda +
PIR1 + PIR2
Dip 3
Dip 4
Off Off Microwavw and
PIR1 AND PIR2
Dip 3
Dip 4 Off On Mic
PIR2 (PIR1
escluso)
Dip 3
Dip 4 Off On Microwave and
PIR1 (PIR2
disabled)
Dip 3
Dip 4 On Off Mic
PIR1 (PIR2
escluso)
Dip 3
Dip 4 On Off Microwave and
PIR2 (PIR1
disabled)
Dip 3
Dip 4
On On Mic
l’ OR dei PIR 1
e PIR 2
Dip 3
Dip 4
On On Microwave and
the OR function
between PIR and
PIR2
Jumper
J1 Inserito LED abilitati Jumper
J1 Plugged LEDs enabled
Jumper
J1 Non inserito LED disabilitati Jumper
J1 Unplugged LEDs disabled
FUNZIONAMENTO IN AND AND MODE OPERATION
Fare riferimento a questa tabella e alla fig.11
per impostare i DIP switch ed il ponticello J1
nella modalità desiderata. Refer to the following chart and to the fig.11
for dip switches and jumper J1 set up.