Lincat WMB5FX, Инструкции по установке, эксплуатации и обслуживанию, Страница: 4 / 12

IS 745 ECN 4386 Page 4 of 12
10
215
INSTALLATION AND COMMISSIONING
This appliance must be earthed.
If replacing the plug connect the terminals as follows:
Green and Yellow wire Earth E
Blue wire Neutral N
Brown wire Live L
Means of isolation with at least 3mm contact separation in all poles must be
incorporated into the fixed wiring of this appliance.
The fixed wiring insulation must be protected by insulated sleeving having a
temperature rating of at least 60°C.
Supply cords shall be oil resistant, sheathed flexible cable not lighter than ordinary
polychloroprene or equivalent elastomer sheathed cord (code 60245 IEC 57).
Do not re-use old hose sets.
Wall installation
The boiler must be installed on a vertical concrete/brick wall with the base in a
horizontal position. The location must be frost free.
Using the wall bracket provided mark the position of the mounting holes. The top of
the wall bracket is 10mm below the height of the fitted unit lid (Fig.1). Drill the holes
and insert suitable wall plugs.
Fig. 1