IS744 ECN 4665
Page 12 of 12
COMPONENT REPLACEMENT
Hob Thermocouple Replacement
Remove the fascia panel and control
knobs as per Fig 4
Loosen the thermocouple tail nut (D) and
withdraw the thermocouple from the valve
Access to the front burners is from the
front behind the fascia panel
Access to the rear burners is from the
rear by removing air intake covers
Loosen the nut of the thermocouple head
(E) from the burner base and withdraw
the thermocouple.
Fitting the new hob thermocouple (TC31),
screw the thermocouple head nut into the
burner base pocket and tighten. Do not
over tighten the nut.
Route the thermocouple capillary and
secure the thermocouple tail nut to the
respective valve. Do not over tighten the
nut.
D
E
Fig 6
Fig 7
