IS91SE_ECN 3592
7
Do not clean the appliance using water jets.
Note: For heavy, stubborn deposits a de-greasing agent ‘
CARBON-OFF’
is available from Lincat
upon request
Warning: Do not spray water or cleaning fluids inside the unit
NB. When branding plates are dry, lightly coat with oil.
When dry reassemble the unit in reverse order.
This appliance should be serviced and maintained regularly, according to the service
instructions. Before carrying out any maintenance on this appliance, isolate from the gas
supply. See “Service Information” below.
SPARE PARTS LIST
Part number
Description
BP10
Branding Plate
BU66
Burner
CO113
Copper Washer (Burner Injector)
CO128
Unequal Tee (10mm to 8mm)
CO87
Test Nipple
HA78
Handle
JE13
Burner Injector - Butane
JE31
Pilot Injector - Natural
JE32
Pilot Injector - Butane
JE46
Burner Injector - Natural
JE127
Bypass injector - Butane
JE131
Bypass injector - Natural
KN174
Control Knob
LE38
Adjustable Leg
LI42
Branding Plate Lifter
PG10
Governor
PI25
Pilot Assembly
SI14
Ignitor Wand
TC03
Thermocouple
TC05
Thermocouple Nut
TC06
Thermocouple Sleeve
TC24
Thermocouple Split Nut – M9
VA40
Control Valve
WA08
Fibre Washer (Burner Injector)
WB01
Cleaning Brush
