8.5 Using boost function
8.7 Using the timer
Using the timer as a minute minder
Using the timer to switch off one or more cooking zones
If the timer is set on more than one zone
Cancelling the timer
You can use the timer in two different ways:
You can use it as a minute minder. In this case, the timer
will not turn any cooking zone off when the set time is up.
You can use I as cut-off timer to turn one or morecooking
zones off after time is up.
You can set the timer up to 99 minutes.
1.
Make sure the cooktop is turned on. And zone
selection key is not activated (zone indication ‘ ’
is not blinking).
2.
Touch timer key, ‘00’ will show in the timer
display and ‘00’ will blink.
3
. Set the time by touching the ‘-’ , ‘+’ or touching
the ‘slider’ control of timer.
4.
Touch timer control again, then ‘0’ will flash.
5
. Set the time by touching the ‘-’ , ‘+’ or touching
the ‘slider’ control.
6
. When the timer is set, it will begin to count
down immediately. The display will show the
remaining time.
7
. Buzzer will beeps for 30 seconds and the timer
indicator shows ‘- -’ when the setting time finished.
8.6 Using child lock function
To lock the controls
Touch the key lock control.
The timer indicator will show ‘Lo’.
To unlock the controls
1
. Make sure the hob is turned on.
2.
Touch and hold the key lock control
for 3 seconds.
3.
You can now start using your hob.
> You can lock the controls to prevent unintended use(for
example children accidentally turning the cooking zones on).
> When the controls are locked, all the controls except the
ON/OFF control are disabled.
When the hob is in lock mode, all the controls are
disabled except the ON/OFF, you can always turn the
hob off with the ON/OFF controlin an emergency, but you
shall unlock the hob first in the next operation.
1.
Touching the heating zone selection control that
you want to set the timer for.
(the right down zone)
2.
Touch timer control, the ‘00’will show in the
timer display, and the ‘0’ flashes.
3
. Set the time by touching the ‘-’ , ‘+’ or touching
the ‘slider’ control.
1
. When you set timer for several cooking zones,
red dots of the relevant cooking zones are
indicated. The timer display shows the min.
timer. The dot of the corresponding zone blinks.
2.
Once the countdown timer expires, the
corresponding zone will switch off. Then it will
show the new min. tier andthe dot of
corresponding zone will flash.
NOTE:
touch the heating zone selection
control,
the corresponding timer will be shown
in the timer indicator.
4.
Touch timer control again, the ‘0’ will flash.
5
. Set the time by touching the ‘-’ , ‘+’ or touching
the ‘slider’ control.
6
. When the time is set, it will begin to count down
immediately. The display will show the
remaining time.
NOTE:
there will be a red dot
in the right
bottom corner of power level
indication which
indicating that zone is selected.
7
. When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
NOTE:
other cooking zones will keep operating if
they are turned on previously.
(set to 15 minutes)
(set to 30 minutes)
1.
Touching the heating zone selection control
that you want to cancel the timer.
2.
Touching the timer control, the indicator
will flash.
3.
Touch the ‘-’ or ‘slider’ control to set the
timer to ‘00’, the timer is cancelled.
12
www.linarie.com.au
cont. operation
- Activate the boost function
1.
Select the zone with boost function.
2.
Touching the ‘boost’ key, then the display
shows‘b’.
-Cancel boost function
1.
Select the zone with boost function.
2.
Touching the ‘minus’ key or touching the ‘slider’
control to cancel the Boost function, and select the
level you want to set.
3.
Boost function can only last for 5 minutes, after
that the zone will go to level 9 automatically.
power
down
Содержание LYON RF9014HOOD
Страница 1: ...RF9014HOOD www linarie com au...
