Linak SMPS-T160, Руководство пользователя

Страница: 24 / 28

Page 24 of 28
Maintenance/cleaning
• The SMPS must be cleaned at regular intervals to remove dust and dirt and it must be inspected for mechani-
cal
damage, wear and breaks
• It is not allowed to spray directly with a high-pressure cleaner on the device
• Interconnecting cables must remain plugged in, correctly fitted with O-rings, during cleaning to prevent
ingress
of water
• Unused slots must be sealed by a blind plug!
• The SMPS-T160 is resistant to the majority of cleaners and disinfectants However, the detergents must comply
with the following basic requirements
- They must not be highly alkaline or acidic (pH value 6-8)
- They must not contain caustic agents
• All cables must be checked for wear and tear on a regular basis. Any defect cables must be replaced.
Warning!
If irregularities are observed, the SMPS-T160 must be replaced.
Chapter 5
LINAK products may be disposed of, possibly by dividing them into different waste groups for recycling or combustion.
We recommend that our product is disassembled as much as possible at the disposal and that you try to recycle it.
Product Metal scrap Cable scrap Electronic
scrap
Plastic recycling or
combustion
SMPS-T160 X X X X
Main groups of disposal:
Repair
Only an authorised LINAK
®
service centre should repair LINAK SMPS-T160. Products to be repaired under
warranty must be sent to an authorised LINAK service centre.
In order to avoid the risk of malfunction, all SMPS-T160 repairs must only be carried out by an authorised LINAK
Service shop or repairer, as special tools and parts must be used.
If a product is opened by unauthorised personel there is a risk that it may malfunction at a later date.
Warranty
There is an 18 months’ warranty on TECHLINE
®
products against manufacturing faults calculated from the
production date of the individual products (see label). LINAK warranty is only valid in so far as the equipment
has been used and maintained correctly and has not been tampered with. Furthermore, the SMPS-T160 must
not be exposed to violent treatment. In the event of this, the warranty will be ineffective/invalid. For further
details, please see standard terms of sale and delivery for LINAK A/S.