Linak SMPS-T160, Руководство пользователя

Страница: 7 / 28

Mounting guidelines:
• Unused sockets must be sealed with a blind plug!
• It is recommended to shield the SMPS-T160 from direct rain and sunlight to avoid overheating and
wear and tear over time.
• When changing the cables on a LINAK SMPS-T160, it is important that this is done carefully, in order
to protect the plugs and pins. Please be sure that the plug is in the right location and fully pressed in
before the cable lid is mounted.
• We recommend to take some precaution and design the wire connection in a way, where the cable
end is kept inside a closed, protected area to guarantee the high IP protection.
Different bracket types are available - to know more, please contact your local LINAK supplier.
Page 7 of 28
1. Unscrew the cable lock
2. Plug in the power cable
3. Screw the cable lock back on
4. Unscrew the cable lock
6. Remove the plugs according
to the number of sockets
needed.
7. Plug in the cables. 8. Screw the cable lock back on.
If the SMPS-T160 comes with mains cable already mounted, please go to step 4.
5. The 4 sockets give you 5
different connection
possibilities. Please see
table on page 9.
Chapter 2