Linak DESKLINE DP, Руководство пользователя

Страница: 16 / 44

Page 16 of 44
Error no. Description
E01 The desk has an unknown position and needs to be initialised.
E02 Overload in upward direction has occurred.
E03 Overload in downward direction has occurred
E16 Illegal keys are pressed.
Other functions:
Adjusting initial height:
It may be necessary to adjust the displayed height due to different thicknesses of desktops etc. The DP1CS will as standard
show either 68cm or 24.5 inch as the default desk height.
Procedure:
Press /\ and \/ keys at the same time and keep them pressed for 5 seconds. This allows the initial height to be adjusted. Until
the initial height can be adjusted, the display will show three minuses (---) - hereafter the display will revert to showing the
height. The height can then be adjusted by either /\ or \/ until the desired height has been reached. The system will return to
normal operation (and give a short blink) after 5 seconds of inactivity on the keys.
The feature can be disabled via configuration in which case pressing the /\ and \/ keys at the same time will be considered an
illegal keypress.
Switch between cm and inch:
Switching between cm and inch can only be done via the DPF configurator
Adjusting the light intensity of the LED display:
Possible settings are Off, 6%, 12%, 19%, 25%, 37%, 50%, 75% and 100%.
The adjustment can only be done via the DPF configurator.
Adjusting the light timeout:
Possible settings are 0-15 seconds and Off.
The adjustment can only be done via the DPF configurator.
Error codes
Below please find the possible error codes that can be displayed. The error codes will only be displayed when a button is
pressed. The display will blink while showing the error code. The E16 error will overrule any other errors as the detection is
registered only in the display and no message is send to the control box.