Linak Deskline BA001, Руководство пользователя

Страница: 12 / 24

Page 12 of 24
Mounting instructions:
Guidelines for mounting the BA001.
The battery box is to be fastened with 2 screws with a head diameter between ø 8 and ø 10 mm.
With regard to the surface pressure, ø 10 mm is preferable. See drawing for placing of mounting holes and the space the box
takes up. M6 nut and screw counterpart is supported too.
The mounting surface to which the battery box is attached should have a surface evenness better than ± 0.5 mm.
The mounting screws must be fastened with a max. torque of 1 Nm.
Alternatively, mount the enclosed bracket following the same guidelines for fastening using the four mounting holes.
The BA001 must not be packed in heat insulating material, but must be placed so that it can emit waste heat to the
surroundings. There are no ventilation holes to consider, the BA001 emits heat through its surface.