LIMIT 267150100, Руководство по эксплуатации

Страница: 4 / 64

2
INTRODUCTION
This device is designed for the fast detection of dampness in wood
and buildings, on construction sites, at home, in the office or shop,
etc.
The 6200 allows moisture detections in wood down to a depth of
approximately 30 to 40 mm. This scanner is even able to detect
moisture behind ceramic tiles or behind and under various floor
or wall coverings! Simply place device on top of the surface to be
examined – no injection into the object required!
OPERATION
1. Place the 6200 onto the surface or slide it across large areas
to detect any presence of moisture or leaks. For correct
measurements, the bottom sensor must be placed completely
on the flat surface of the material to be measured.
2. The device shows the amount of moist
in proportion to the moisture content
in the material. The result is relative;
the difference between dry and wet
material is indicated and the result
should not be treated as the exact
moist content in terms of weight.
3. The display value is proportional
and depends on the density and
the humidity of the material to be
measured and can be interpreted as
follows:
EVALUATION
Concrete / wash floor
Indication Moisture rating
0 ~ 5 Dry
6 ~ 9 Moist
> 10 Wet: too wet for machining and/or finishing.
GB