Lilliput BM150-4KS, Руководство пользователя

Страница: 13 / 27

12
Switch aspect ratio setting among from [Full][17:9][16:9][4:3][1.85:1][2.35:1].
For example:
In [Full] mode, images are scaled to fill the entire screen.
In [4:3] mode, images are scaled up or down to fill the maximum 4:3 portion of
the screen.
In [16:9] mode, images are scaled to fill the entire screen if the device aspect is
16:9.
Underscan
If the image shows size error, use this setting to zoom in/out pictures
automatically when receiving HDMI signals
Pixel to Pixel
The pixel to pixel is a monitor set to 1:1 pixel mapping with native fixed pixels,
which avoids loss of sharpness due to scaling artifacts and normally avoids
incorrect aspect ratio due to stretching.
Check Field
Use the check field modes for monitor calibration or to analyze individual color
components of an image. The device preset in Blue, Green, and Red check
field modes, only the selected color will be shown.
Peaking
The peaking is used to aid the camera operator in obtaining the sharpest
possible picture. Select "On" to display colored outlines around sharp areas of
the image.
NOTE: Peaking color and level only can be changed when under SDI mode.
False Color
This monitor has a false color filter to aid in the setting of camera exposure. As
the camera Iris is adjusted, elements of the image will change color based on
the luminance or brightness values. This enables proper exposure to be
achieved without the use of costly, complicated external equipment.