5
Mode/Reset Button
By pressing the Mode/Reset Button for certain period of time, users can
perform the following tasks.
•
Change Port Status LED Mode
to read the port status correctly in the
two different modes (Link/Act/Speed mode or PoE mode).
•
Reset the Switch
to reboot and get the switch back to the previous
configuration settings saved.
•
Restore the Switch to Factory Defaults
to restore the original
factory default settings back to the switch.
Note
: According to the table below, users can easily judge which task is
being performed by reading the LED behaviors while pressing the
Mode/Reset button.
Once the LED behaviors are correctly
displayed, users may just release the button.
Table 4:
Mode/Reset Button Descriptions
Task to be
Performed
Time Period
of Pressing
Button
SYS LED
Behavior
Port Status LED
Behavior
Change LED
Mode
0 ~ 2 seconds
ON
Green
LED status will be changed
according the mode selected.
Reset the Switch 2 ~ 7 seconds
Blinking
Green
ALL LEDs
Light OFF
Restore to
Defaults
7 ~ 12
seconds
Blinking
Green
ALL LEDs
Stay ON
