3
Chapter 2
Installing The Switch
C
AUTION
:
Circuit devices are sensitive to static electricity, which can
damage their delicate electronics. Dry weather conditions or walking
across a carpeted floor may cause you to acquire a static electrical
charge.
To protect your device, always:
•
Touch the metal chassis of your computer to ground the static
electrical charge before you pick up the circuit device.
•
Pick up the device by hold it on the left and right edges only.
•
If you use outdoor device connected to switch with cable then you
need to install a surge arrester in between outdoor device and switch.
Figure 3 Add a surge arrester between outdoor device and switch
N
OTE
:
The switch is an indoor device; if it is to be used with outdoor
devices such as outdoor IP camera or outdoor WiFi AP, then users
must install a surge arrester to protect the switch
W
ARNING
:
•
Self-demolition on Product is strictly prohibited. Damage caused by
self-demolition will be charged for repairing fees.
•
Do not place the switch in outdoor environment.
•
Before installation, please make sure the input power source meeting
the product specification
•
Before importing / exporting configuration file, please make sure the
firmware version is always the same.
