1st Video input must be connected when power up the system. Otherwise unreadable codes will be displayed.
Remaining Video inputs may be connected randomly. When matrix is powered up, the system will perform an
auto-test including video-input signals, and non-connected Video-input will be displayed(See diagram below).
TOURING DISPLAY
A
Auto Switching
Date
Time
Monitor Number
OPERATION
Monitor Display When Power Up
MON
01 <H>
CAM
01>CAMERA01
<
10/13/98
17
28
01
H
Manual Switching
Camera Number
Control Sign
Camera ID
Prompt "<"
1. Matrix system can only be controlled and operated when "<" sign is displayed.
After the system is power up, press numeric keys (1~9) followed by MON key to select a monitor.
"<" control sign will appear on the monitor signaling the system is ready for set up or operation.
2. "<" control sign will disappear automatically when there isn't any operation for 5 minutes.
Setting Mode
Press SETUP key under "<" control sign, the SETUP MENU
will appear as shown below. (No initial password was set)
1. SYSTEM SETUP:
Set up Date, Time, Password and to clear all Settings.
2. SEQUENCE TABLE:
Up to 16 sequence tables can be set. Each table can set up 32 camera inputs and corresponding dwell time.
Note: When camera is not included in sequence table. It will not be displayed.
3. MONITOR SETUP:
Maximum 2 sequence tables are allowed to be assigned to each monitor to view up to 64 cameras according
to set up in the sequence tables. Including switching time, alarm and video loss displays.
Set up SEQUENCE TABLE and MONITOR SETUP first so that keyboard provides the ability to select and
switch different channels. (Please refer more operation details from P9~P11)
POWER
F1
F2
F4
F3
1
PRESET1
PRESET2
FAST
PRESET3
2
3
SETUP
MON
6
5
4
CAM
9
8
7
ENT
0
CLR
PRESET
ESC
AUX LIGHT
CTRL2
CTRL1
AUTO
SPRAY
WIPER
SEQ
ZOOM
IN
FAR
FOUCS
IRIS
O
NEAR
OUT
PAN
RESET
ALARM
ZOOM
FOUCS
IRIS
C
AUTO
AUTO
FOUCS
IRIS
CAM ESC
180 REV
CAM SETUP
LENS SPEED
6
