*
*
*
Set FTP to binary mode using the command "bin".
In FTP session window, Enter "bin".
Upload the software into IP Fast Dome by FTP "put" command.
In FTP session window, enter "put flash.bin".
In FTP session window, enter "bye" to quit FTP session.
FTP session may freeze for around 1 minute to transfer and automatically upgrade the
software. During that time, ping the IP Fast Dome until get constant reply, which means
system had complete upgrading and rebooting, then open browser to verify the software
version been updated.
If FTP session quits immediately after issued by command, you should continue
pining IP Fast Dome instantly. If IP Fast Dome replies to the ping command right after
pinging, it means IP Fast Dome may not enter the self-programming stage to verify the
software version. If not updated, then you should reboot IP Fast Dome and back to
step 3 try again.
Note :
C:\temp>
Connected to 192.168.0.200
220 192.168.0.200 MERIT LILIN FTP server (ARM BEV 3.0.H)
ready.
User (192.168.0.200 : (none))
331 Password required for root.
Password:
<=enter
as default
230 User root logged in.
ftp>
200 Type set to I.
ftp>
200 PORT command successful
150 Opening BINARY mode data connection for flash.bin
226 Transfer complete.
ftp: 2097152 bytes sent in 10.11 Seconds 207.43Kbytes/sec.
ftp:
221 Goodbye.
<=Quit ftp session immediately
<= if the window is frozen, please open another
dos session
ftp 192.168.0.200
root
pass
bin
put flash.bin
bye
62
Appendix A.
