29 66-UM-4KNVR-CSE-6
⚫
System Recording Mode: Choose between
Manual
or
Scheduled
recording.
⚫
Overwritten: Switch on to overwrite old files when the storage is full.
⚫
Pre-alarm Record: Switch on to start recording for a period before an alarm occurs.
⚫
Limited Recording: Set the number of days to record (from now to the designated day).
⚫
Protected Recording: Set how many days of video the NVR will preserve.
Chapter 6 Alarm Setup
Click
to enter
NVR SETTINGS,
press
ALARM
in the left pane to enter the
ALARM
SETUP
page. The setting options are described below:
Chapter 6-1 General
⚫
Alarm Input Type: Set the alarm sensor to
Normally Open
(NO),
Normally Closed
(NC), or
IP
Camera
. The last option will trigger the alarm only when receiving a signal from IP cameras.
⚫
Motion Enable: Switch on/off motion detection. Remember also to set the motion detection area
in the tab
MOTION AREA
.
⚫
Motion Sensitivity: Adjust the sensitivity of motion detection. Higher sensitivity indicates that the
alarm can be more easily triggered.
⚫
Save Event Snapshot: Enable to store a snapshot on the hard drive when an alarm is triggered.
Chapter 6-2 Motion Area
Click and drag across the grid to highlight motion detection areas. Click
Apply All Channels
to apply
the areas to all camera channels.
