![Lil Pick Up LZ800-6 Скачать руководство пользователя страница 22](http://html.mh-extra.com/html/lil-pick-up/lz800-6/lz800-6_manual_1916211022.webp)
22
2) Stopping the Engine
Release throttle and completely stop the vehicle. Apply the parking brake by using brake lever lock on
brake lever. Set transmission lever in PARK position.
Do not push the emergency stop switch to OFF position.
Turn key in ignition switch to OFF. Remove key from ignition switch.
3) Shifting the Transmission
Let engine idle warm up. Apply brakes and select the desired gear.
Gradually press the throttle lever to increase engine speed and thus engaging the continuously variable
transmission (CVT). At the opposite, when the throttle lever is released, the engine speed decreases.
4) Using the Reverse
CAUTION:
When changing from forward to reverse, or vice-versa, always completely stop the vehicle and
apply the brake prior to moving the transmission lever.
The same procedures as SHIFTING THE TRANSMISSION above apply except for the following. Set the
transmission lever in REVERSE position.
SPECIAL PROCEDURES
1) Engine does not start
When the engine does not start after several attempts, Proceed as follows.
1 Turn ignition switch to OFF, wait 10 seconds, then start again.
2 Check if fuel is empty.
3 See an authorized Lil Pick Up ATV dealer.
2) Engine Overheat
If engine overheats, try the following:
1 Check and clean radiator fins.
2 Check coolant level and refill if possible
3 See an authorized Lil Pick Up ATV dealer as soon as possible.
CAUTION:
Reduce vehicle speed but try to keep vehicle moving to supply air to radiator. If engine is still
overheating after approximately one minute, stop vehicle and set transmission to PARK. Stop engine.
Place the ignition switch to ON position (DO NOT RESTART ENGINE YET).The radiator fan will cool the
radiator. Let engine cool down. Check coolant level and refill if possible.
3) Post-Operation Care
When vehicle is used in salt-water environment (beach area, launching/loading boats etc.), rinsing the
vehicle with fresh water is necessary to preserve vehicle and its components. Metallic parts lubrication is
highly recommended. This must be performed at the end of each operating day.
When vehicle is operated in muddy conditions, rinsing the vehicle is recommended to preserve vehicle and
its components and to keep lights clean.
The radiator can be very hot, wear gloves before touching radiator.
WARNING
告
Never refill cooling system when engine is hot.
WARNING