15
Set the switch to“ ”to turn on the high beam and the taillights.
（
2
）
Start Button
First confirm the gear shift lever is in P or N and emergency stop switch to “RUN”,and put key to “ON”
position, then you can press start button to start engine; release this button when engine starts.
●
Do not operate the electric starter continuously for more than seconds, or starter damage could occur.
Wait at least 5 seconds between each operation of the electric starter to let it cool.
●
Do not press start button with the engine running, or damage to the electric starter can result.
（
3
）
Blinker Switch
Located under the start button. Push to the left to turn on the left blinker and push to the right to turn on the
right blinker.
（
4
）
Emergency stop switch
Hit the emergency stop switch to kill the engine. Press the button back in to restart the engine.
This switch can be used to stop engine and as an emergency control.
NOTE: Do not turn on the key switch when the emergency stop switch is in “OFF”.
（
5
）
Horn Button
Use the horn button when coming to an intersection, or when a pedistrian is present.
（
6
）
Hazard warning light Button
When pulling off the side of the road or trail, use the hazard switch to indicated to on coming riders that you
are there.
5)
Multifunction gauge
This vehicle is equipped with an electronic multifunction gauge.
A
）
. SET/RESET button B
）
.TIME SET button
C
）
. MODE button D
）
.KM/H/MPH button
1
）
. Speed meter indicator 2
）
. Check engine indicator
3
）
. Headlight indicator 4
）
. Oil pressure indicator
1
2
3
4
5
6
C
D
7
8
9
10
11
B
A
