5
7EN150104 Rev. 8
• 2020
www.hillrom.com
Definitions
1. Lift arm
2. Flexlink
3. Latches
4. Sling bar
5. Outer tube
6. Motor for lift arm
7
. Product label
8. Front wheels
9
. Base
10
. Rear wheels with brakes
1 1. Motor for base-width adjustment
12
. Locking handle
13
. Cable for hand control
1
4. Control box
1
5. Battery
16
. Hand control
17
. Lift mast
1
8. Holder for Quick Reference Guide and colour
codes for sling sizes
19
. Emergency lowering (mechanical)
20. Emergency stop
21. Emergency lowering, electrical
22. Charge indicator (Charge = charges)
23. Charge indicator (On = charger connected)
Technical Data
The device is intended for use indoors.
Type B, in accordance with the electrical shock protection
class.
Class II equipment.
Forw
ard dir
ection
Maximum load:
175 kg (385 lbs)
Material:
Powder-painted steel
Weight:
Total:
42,7 kg (94.1 lbs)
Heaviest removable part:
22,3 kg (49.2 lbs)
Wheels:
Front: 75 mm (2.9 in) twin wheel
Rear: 75 mm (2.9 in) individual wheels fitted
with brakes
Turning
Diameter:
1380 mm (54 in)
Emergency
lowering device:
Mechanical and electrical
Lift Interval:
1270
mm (50 in)
Lifting speed:
30 mm/sec (1.18 in/sec) without load
Sound level:
39
dB(A)
Protection class:
IP X4
Operating Forces
of Controls:
Buttons on hand control:
2.4 N
Electrical
data:
24 V
Intermittent
power:
Int. Op 10/90, active operation max 2 min.
Only 10% of a given length of time may be
active, but no more than 2 min.
Batteries:
2 x 12 V 2.9 Ah valve-regulated lead-acid
gel-type batteries. New batteries are provided by
the supplier.
Battery charger:
Built-in, 100-240 V,AC, 50-60 Hz,
max 400 mA.
Lift motor:
24 V 6 A, permanent magnetic motor with
mechanical safety mechanism, safety nut
and outer tube.
Motor for
base-width
adjustment:
Surrounding
functional
environment:
24 V 3.5 A, permanent magnetic motor
Temperature: +10°C to +50°C, (50° F to 122° F)
Humidity: 20% to 90% at 30°C non-condensing,
Atmospheric pressure: 700-1060hPa.
21
22
23
14
20
9
4
3
5
8
1
17
7
19
2
10
13
14
16
15
18
6
12
11
