manualshive.com logo in svg

Liko Multirall 200, Инструкция по эксплуатации, Страница: 6 / 14

Поделиться
Скачать
Liko Multirall 200 Скачать руководство пользователя страница 6

6

Liko  •  www.liko.com

Instruction Guide Multirall  •  7EN125103-01

Old batteries are to be returned to authorized Liko 

personnel, or left at the nearest recycling station.

Adjustable Friction Brake

The speed at which the lift unit travels along the rail 

can be regulated via the friction brake on the car-

riage. Turn the brake adjustment screw clockwise to 

increase resistance and counter-clockwise to reduce 

resistance.
The following carriages are equipped with adjustable 

friction brakes: Prod. No. 3126011 and 3126015.

Charging the Batteries

To obtain maximum battery life, you must charge the 

batteries regularly. We recommend that the batteries 

be charged whenever the lift is not in use. The bat-

teries are fully charged after approximately 8 hours. 

When fully charged, batteries in good condition are 

sufficient for approximately 60 lift cycles.  

The charger is approved for use in damp areas. 
1.  

Make sure the emergency stop button is not  

 

pressed in.  

2.  

Insert the handcontrol in the battery charger.  

3.  

Connect the charger to a 100-240 V wall  

 

socket.  

4.  

The green light indicates that the charger is  

 

connected to the power supply. 

5.  

The charging starts automatically and the  

 

yellow light indicates that the batteries are  

 

charging.  

6.  

When the batteries are fully charged, the  

 

charger stops automatically and the yellow  

 

light shuts off.  

Charge Indicator

Multirall has two indicators for low battery charge:
• a buzzer sounds during lifting
• a diode lights up during lifting
The battery should be charged immediately when 

either of these indicators is activated.

Содержание Multirall 200















Отзывы:

Нет отзывов