manualshive.com logo in svg

Liko Multirall 200, Инструкция по эксплуатации, Страница: 10 / 14

Поделиться
Скачать
Liko Multirall 200 Скачать руководство пользователя страница 10

10

Liko  •  www.liko.com

Instruction Guide Multirall  •  7EN125103-01

  

9. Slide the strap cover back over the strap  

  joint. Repeat steps 6-9 on the other end of  

  the strap.

Adjustment of Adjustable Extension Belt (Prod. No. 3136226-29)

1. Slide the strap cover   

  away from the strap joint.

2. Remove the safety pin 

  and loosen the strap.

4. Thread the folded strap end into the strap joint,  

  as indicated by the arrows.

5. Replace the safety pin into the strap 

    fold.

6. Tighten the strap properly.    

 

 

Make sure that the safety 

  pin is correctly mounted, so  

  that it prevents the strap from  

  gliding out.

7. Slide the strap cover back        

    over the strap joint.

3. Adjust the strap to the desired  

    length. 

The procedure for adjusting the Adjustable Extension Belt is described below. Before adjusting the strap, 

measure the appropriate length to enable optimal working height for the caregiver.

8. The Extension Belt is now    

  ready for use.

10. Connect the Room to Room Strap to the  

 

 

Quick-release Hooks. The loose strap ends   

 

should now have the same length.

 

NOTE! Excess strap must not be cut off,   

 

due to the risk of the strap gliding out.

Содержание Multirall 200















Отзывы:

Нет отзывов