6
w w w . l i k o . com
Likorall 242, 243, 250 • 7EN120115-03
Indication: charging
Likorall indicates in two ways that the battery
needs charging:
• Buzzer: sounds when lifting
• LED, : flashes (red) when lifting
When either of these signals sounds or illuminates,
the lift should be charged as soon as possible.
See Charging the batteries, page 7.
SSP Limit Switch
The lifting motion is stopped electrically with a light touch on the SSP Limit Switch from, for instance, the strap
stops, Q-link or if the lift strap is subjected to harmful strain, for example, if it is pulled sideways or folded over
during the lifting motion. If the SSP Limit Switch is activated so that the lifting motion stops, the lift can once
again be operated after the lift strap is straight again (a short delay in the lifting motion is normal in these cases).
The SSP Limit Switch protects the lift motor from mechanical strain and it also prevents squeeze injurie.
Ensure that the lift strap is kept straight and stretched when it runs in and out of the lift motor.
Carriages with adjustable friction brake
The amount of drag along the rail can be
adjusted on carriages equipped with a
friction brake. Turn the brake clockwise
for increased resistance and counter
clockwise to reduce resistance.
The following carriages have a friction
brake: prod. no. 3126011 and 3126015.
Hang-up HandControl
Hanger
When not in use, the hand
control can be hung on
the Hang-up Hand control
hanger.
Electrical emergency lowering
Emergency lower by pushing
in the button on the end cover
of the lift. Always ensure that the
emergency lowering is made to
a bed, wheelchair or other suitable
location.
A
A
Never move the lift by pulling the hand control!
