6
www.hillrom.com
7EN120114 Rev. 10 • 2020
CSP
(Central Suspension Point)
C
A
B
H**
D*
L***
Measurements
*
Minimum distance from ceiling to CSP at maximum lifting height with the standard carriage.
** Built-in dimension: the distance between the attachment point for the lift unit on the carriage and the CSP at maximum
lifting height.
*** Lifting interval: the distance between maximum lifting height and minimum lifting height measured in CSP.
Measurements in mm.
Measurements in inch.
A
B
C
D*
H**
L***
165 340
250
304
221
2050
A
B
C
D*
H**
L***
6.5
13.4
9.8
12.0
8.7
80.7
Overhead view
Lateral view
Guidance and manufacturer’s declaration – electromagnetic emissions
The product is intended for use in the electromagnetic environment specified below. The customer or the user of this
product should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The product uses RF energy only for its internal
fution. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
The product is suitable for use in all establishments
other than domestic and those directly connected
to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/ flicker emissions
IEC 61000-3-3
Complies
EMC Table
Ceiling
