Lika Modbus LDT10, Руководство пользователя

Страница: 35 / 44

LDT10
Press the key at the top of the page to enter the
Network
page. For any
information please refer to the “5.5 Network page” section on page 25.
Press the key at the top of the page to move back to the
Home
page. For
any information please refer to the “5.10 Home page” section on page 37.
Press the
ADVANCED PARAMETERS
key to enter the
Advanced node setup
page.
5.9 Advanced node setup page
WARNING
All users are allowed to display this page yet the functions are available to the
Level 2 – Administrator users only.
By pressing the
ADVANCED PARAMETERS
key in the
Node setup
page you
enter the
Advanced node setup
page. In this page the list of the advanced
parameters that are used to configure the mechanical and electronic
characteristics of the specific actuator (for such reason they have seldom to be
be reprogrammed after the first configuration) is available.
All the parameters in this page are described in the “User's guide” of the specific
actuator, for a comprehensive description please refer to it.
MAN LDT10 E 1.2 HMI interface 35 of 44