Lika DRAW WIRE SFA-10000 Series, Руководство пользователя, Страница: 45 / 72

SFA-5000 • SFA-10000 Profibus
 DDLM_Chk_Cfg:
it sets the number of bytes used for data transmission in
Data_Exchange
mode (see the “6.5 DDLM_Chk_Cfg“ section).

DDLM_Data_Exchange:
it is used as "standard operation mode".
Used by the Master to send the
Preset value
; used by the Slave to transmit
the position and velocity values (see the “6.6 DDLM_Data_Exchange“
section).

DDLM_Slave_Diag:
it is used when the power is turned ON and whenever the Master needs
diagnostic information from the Slave device (see the “6.7
DDLM_Slave_Diag“ section).

Set_Slave_Address:
It is used to set a new node number via BUS (service SAP55, see the “6.8
Set_Slave_Address command (SAP55 service)“ section).
MAN SFA_5000_10000_PB E 1.0 Profibus® interface 45 of 72