Lika AMM80, Руководство пользователя

Страница: 16 / 60

AMM80 • SSI, BiSS, & RS-485
Step 2
Gently press the code disk
3
into place on the
PF5025
spacing tool
1
. Tighten
the two M3 x 3 UNI5929 grub screws
4
to firmly fasten the code disk
3
; make
sure that the code disk
3
perfectly rests on the spacing tool
1
before fixing it;
the max. tightening torque is
1.3 Nm
.
WARNING
Please ensure that the grub screws
4
are tightened properly and do not stick out
of their housing. Make sure that they do not hit the encoder unit
5
, they may
damage the LEDs.
3.4 Mounting the encoder
WARNING
Always handle the encoder unit by grasping the enclosure on the sides.
Step 3
Slide the encoder unit
5
over the code disk
3
until the screw holes
6
match up;
follow the pilot on the flange or mount according to the pins; make sure that
the enclosure of the encoder unit
5 does not hit or touch the code disk 3 ;
always handle the encoder unit
5
by holding the enclosure on the sides.
MAN AMM80 SSI_BiSS_RS485 E 1.5.odt 3 - Mounting instructions 16 of 60