Lightwave LTW-4 Series, Инструкции по эксплуатации и установке

Страница: 20 / 28

2 0 | P a g e
Temperature Management Devices
Your LIGHTWAVE UV system is designed to run continuously to ensure optimal disinfection.
However, during periods when no water is drawn through the system, the energy from the
disinfection process can cause the temperature of the water inside the chamber to rise. In
extreme situations elevated water temperature or the fluctuation in temperature can lower the
output of the UV lamp. In these cases, or if the elevated water temperature is a nuisance,
LIGHTWAVE recommends one of the following forms of temperature management devices.
Cooling Fan
Designed for use on High Output systems, the fan runs continuously to cool the
water by forced convection. The long-life fan is powered independently using a
compact modular power adapter that operates from 90-265V (47-63Hz). Order
PN LTW-130014 (only fits LTW-H4, LTW-H5, LTW-H6 systems).
Temperature Relief Valve (TRV)
On reaching a higher temperature, the TRV is designed to drain a small amount
of water to allow fresh, cooler water to enter the system. The TRV works without
power and comes complete with 10’ of drain line. Order PN LTW-TRV05for 1/2”
ports, PN LTW-TRV075 for 3/4” ports, PN LTW-TRV10 for 1” ports and PN LTW-
TRV15 for 1 1/2” ports.
Expansion Modules
LTW-5 & LTW-6 controllers incorporate an “Infinite Expandability Port” (IEP) which allows
for expansion to the UV sensor and all other modules. Each module (including the sensor)
comes with both a male and female connection. Connect any device to the controller and all
subsequent devices are then connected into the female end of last device added in a “daisy
chain” configuration.
The following optional expansion modules are available for use on LTW-5 & LTW-6 UV controllers.
Contact your authorized distributor for purchasing information.