Q.
How do I use a Signal Booster with the Lightwave Link?
A.
The Signal Booster can extend the range of 6 unique commands from the
Lightwave Link. Each of these commands needs to be transmitted using the
LightwaveRF app whilst the Booster is in linking mode for it to be saved and
stored. It will then automatically repeat the signal when ever that command is
sent using the LightwaveRF app.
Q.
Do I need a permanent internet connection?
A.
On startup the Lightwave Link always needs an internet connection to
acquire the time and its location. It is possible to use the Link without this
connection later, however remote commands will not function.
Q.
Which ports does the Lightwave Link use?
A.
The Lightwave Link operates on ports 69 & 2011 on UDP for remote
connectivity and 9760 & 9761 for local connectivity.
FAQs
