Lightwave Research Status Cue Скачать руководство пользователя страница 76

Страница: 76 / 348

3-2

Status Cue

User’s Manual

2. Select the appropriate

Status Cue Device ID

(MIDI ID) by clicking in its field

and typing in the ID number. The correct setting is required for redundant
systems and for controlling Status Cue from another MIDI device.

3. Click the appropriate check boxes to turn on or off the following items:

•

MIDI In

- if this is the redundant backup system, if you are controlling this

Status Cue via MIDI, or if you would like for MIDI commands to be
captured in a CueList.

•

MIDI Out

- if this system is the master system, you are planning to output

MIDI data to external devices.

4. Select the correct driver for your MIDI card from the

Device Driver

drop-down

menu. If you do not have the driver installed for your MIDI card, refer to the
documentation provided with the card to install its driver.

5. Click the following boxes in the MIDI In field:

•

Apply to CueLists

-if you plan on using an external MIDI device for

CueLists.

•

Apply to Songs

- if you plan on using an external MIDI device to change

Songs and play Presets. Otherwise, select

Neither

if you do not have a

backup system.

6. Click the following boxes in the MIDI Out (Redundancy:) field:

•

Apply to CueLists

-if this is the master system and you are slaving a

redundant system to control CueLists.

•

Apply to Songs

- if this is the master system and you are slaving a redundant

system to control Songs.

•

Neither

-if you do not have a backup system.

7. Click the

button to accept changes.

Note: for complete information on redundant systems, refer to "Redundant System

Installation" on page B-1.

MIDI Device Configuration

Status Cue can control external MIDI devices with CueLists through the following
protocols:

•

Musical Instrument Digital Interface (MIDI)-standard MIDI protocol

•

MIDI Show Control (MSC)-defined subset of MIDI System Exclusive for
entertainment

•

System Exclusive protocol (SysEx)-protocol for any device that contains its
own exclusive information from the manufacturer or for the industry type

To configure and control external MIDI devices, complete the following
procedure:

Содержание Status Cue





























































































































































































































































































































































Результаты поиска

Содержание Status Cue

Отзывы:

Lightwave Research Status Cue, Руководство пользователя, Страница: 76 / 348

Результаты поиска

Содержание Status Cue

Отзывы: