Lightwave Research Status Cue, Руководство пользователя, Страница: 116 / 348

5-12 Status Cue User’s Manual
Delay
Scenes are used as Steps in a Sequence. Delay is the total time an individual Step
waits before moving to the next Step in the Sequence. The Scene or Sequence
window displays the current
Delay value, ranging from 0.1 second to 36 minutes
(
2160 seconds
). Delay is affected by the
Rate
value (refer to "Rate" on page 5-
14) in Sequences. Rate will override XFade and MSpeed times. Refer to Figure
5.14.
Note: if you have a static Scene that is not in a Sequence, Delay time will not be
used.
Figure 5.14. Delay Diagram
In a Step of a Sequence, if Xfade has completed its value change before Delay,
Status Cue holds the value until the duration of Delay has expired. Refer the last
Step in Figure 5.14. For this reason, you may wish to set Delay to an equal or
greater value than Xfade so it can complete its value change.
Example: if a 10 second Xfade time is set in a Step and a 5 second Delay is set, the
selected fixture will only be 50% finished with its Xfade before the
Sequence advances to the next Step.
Tip: to make circular motions with fixtures, experiment with setting Delay less
than Xfade.