Lightwave Research Status Cue, Руководство пользователя, Страница: 119 / 348

Chapter 5 Scenes, Fixture Groups, and Palettes 5-15
5
Example 2: set Xfade to 2 Seconds, Delay to 3 Seconds, and Rate to 2 x on each
Step. The resulting Steps will Xfade for 4 seconds and Delay for 6
seconds.
Example 3: to build a Sequence that has a 2 second delay on each Step, you can set
Rate for 1 x and Delay for 1 Second, or set Rate for 1 x and Delay for
2 Seconds. So, it is just as effective to increase or decrease the speed
of a Sequence by increasing or decreasing the Delay of each Step and
leaving Rate set for 1 x. The end result will be the same.
Set the Rate time (if required) by pressing the < RATE > key in the SEQUENCE
group (Figure 5.17) and typing the desired Rate and press the < ENTER > key.
Alternately, click the up and down buttons in the Rate field (Figure 5.18) to set the
desired time.
Figure 5.17. SEQUENCE Group
Figure 5.18. Rate Field