Lightware UBEX-PRO20-HDMI-F100, Руководство пользователя, Страница: 74 / 185

6. Lightware Device Controller (LDC) series – Extender Application Mode – User's Manual 74 6. Lightware Device Controller (LDC) series – Extender Application Mode – User's Manual 74
EXTENDER APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
6.5. Properties Windows - Video Layer
6.5.1. HDMI Input Ports (TX/TRX Modes)
Clicking on the HDMI input 1 or 2 port icon results opening the Port properties. The most important signal
information and settings are available on the panel: #hdcp
Port properties window of the HDMI in 1 (TX)
Available settings and tools:
▪ Port naming;
▪
HDCP setting
(Enable / Disable);
▪ Frame Detector ;
▪
Reloading factory default settings
for the selected port.
6.5.2. Local HDMI Output Ports (TX/TRX Modes)
Clicking on the HDMI output 1 or 2 port icon results in opening the Port properties. The most important
signal and display information and settings are available on the panel: #hdcp #power5v
Port properties window of the HDMI out 1 (TX)
Available settings and tools:
▪ Port naming;
▪
HDCP mode
:
– Depends on input: the level and version of HDCP-encryption depends on the source device;
– Maximum possible: the output ports set the maximum HDCP-encryption level which can accept by
the connected sink device.
– Forced HDCP 2.2 Type 1: the output ports always force HDCP 2.2 Type 1. If the sink device supports
this HDCP-encryption level, the signal will be encrypted with HDCP 2.2 Type 0/1.
The signal will be
encrypted with HDCP 2.2 Type 1 when the source and the sink either support this HDCP-encryption level.
▪
Power 5V mode
(Auto / Always on / Always off);
▪ Frame Detector ;
▪
Reloading factory default settings
for the selected port.

  

  