7. Programmers’ Reference
series – Extender Application Mode – User's Manual
112
7. Programmers’ Reference
series – Extender Application Mode – User's Manual
112
EXTENDER APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
7.6.22. Query the Source MUX Options
The source multiplexer (
Source MUX
) makes available routing more different source signals to the HDMI
output ports. See more details about this function in the
section.
The query responses the available source signals for the selected output port.
Command and Response
#mux #sourcemux
ç
GET•/MEDIA/VIDEO/
<out>
.SourceMuxOptions
æ
pr•/MEDIA/VIDEO/
<out>
.SourceMuxOptions=
<mux_options>
Parameters
Parameter
Parameter description
Value
Value description
<mux_options>
The availabe sources for
the output port
D1
The D1 destination stream is selectable for
the output port
(only for O1)
.
D2
The D2 destination stream is selectable for
the output port
(only for O2)
.
I1
The stream of the
I1 local input port
is selectable
for the output port
(only for O1)
.
I2
The stream of the
I2 local input port
is selectable
for the output port
(only for O2)
.
O1
The
copy
of the stream of O1 output port is
selectable for the output port
(only for O2)
.
Example
ç
GET /MEDIA/VIDEO/O2.SourceMuxOptions
æ
pr /MEDIA/VIDEO/O2.SourceMuxOptions=D2;I2;O1
7.6.23. Source MUX Setting
The source multiplexer (
Source MUX
) makes available routing more different source signals to the HDMI
output ports. See more details about this function in the
section.
The command sets the source signal for the output port. Query the available options with the command
described in the previous section.
Command and Response
#mux #sourcemux
ç
SET•/MEDIA/VIDEO/
<out>
.SourceMux=<
destination
|
in
|
out
>
æ
pw•/MEDIA/VIDEO/
<out>
.SourceMux=<
destination
|
in
|
out
>
Example
ç
SET /MEDIA/VIDEO/O1.SourceMux=I1
æ
pw /MEDIA/VIDEO/O1.SourceMux=I1
7.7. Video Port Settings - Transceiver Mode
INFO:
Video port numbering can be found in the
section.
7.7.1. Query the Status of Source Port
Command and Response
#poststatus
ç
GET•/MEDIA/VIDEO/XP.SourcePortStatus
æ
pr•/MEDIA/VIDEO/XP.SourcePortStatus=
<in_status>
;...;
<in_status>
The response contains 5 ASCII characters for each port. The first character is reserved, the next four
characters represent a 2-byte HEX code showing the current state of the input ports.
Example
ç
GET /MEDIA/VIDEO/XP.SourcePortStatus
æ
pr /MEDIA/VIDEO/XP.SourcePortStatus=T00AF;T00EF
Legend
Example and Explanation (for input 1, T00AF)
Byte 1
Byte 2
Character 2
Character 3
Character 4
Character 5
BIT 7-6
BIT 5-4
BIT 3-2
BIT 1-0
BIT 7-6
BIT 5-4
BIT 3-2
BIT 1-0
Reserved
Reserved
Reserved
Reserved
Embedded
audio status HDCP status
Signal
present
status
Connection
status
0 0
Reserved
Reserved
Reserved
Reserved
Unknown
0 1
Reserved
1 0
No
embedded
audio
Not
encrypted
No signal
Not
connected
1 1
Embedded
audio
presents
Encrypted
Signal
presents
Connected
T 0 0 A F
Reserved character, always T.
Reserved character, always 0.
Reserved character, always 0.
Embedded audio / HDCP status
Signal present / Connection status
Letter
Byte 1
Byte 2
T
0
0
A
F
Reserved
0 0
0 0
0 0
0 0
1 0
1 0
1 1
1 1
Reserved
Reserved
Reserved
Reserved
No embedded
audio
Not
encrypted
Signal
presents
Connected