Lightware MX2-8X8-HDMI20-AUDIO страница 6 Скачать руководство пользователя

Страница: 6 / 72

1. Introduction

MX2-8x8-HDMI20 series – User's Manual

Introduction

Thank You for choosing Lightware Matrix Routers. The MX2-8x8-HDMI20-Audio

is the first Lightware HDMI2.0 standalone matrix switcher that supports

uncompromised 4K UHD resolution at 60Hz 4:4:4. Thanks to its compact size

and silent design, it is particularly suitable for offices and meeting rooms, for

4K live events, and for futureproof operation centers. In the first chapter we

would like to introduce the device highlighting the most important features in

the below listed sections:

Description

Box Contents

Features of the Device

Typical Applications

Safety and

Warranty

Info

Quick

Start

Guide

Phoenix combicon

3-pole connector

Phoenix combicon

5-pole connector (16x)

Safety and Warranty

info, Quick Start Guide

1.3. Features of the Device

Maximum A/V Compatibility

The matrix is compatible with the latest HDMI 2.0

standard as well as with HDMI 1.x and DVI 1.0 standards.
4K Video without Compression
HDMI 2.0 signal switching with 4k@60Hz and RGB

4:4:4 colorspace, 18 Gbit/sec bandwidth.

HDCP Compliant

MX2-8x8-HDMI20 matrix fulfills the HDCP standard.

HDCP capability on the HDMI inputs can be disabled

when non-protected content is extended.

Audio Embedding and De-embedding

Each input port has audio connectors for embedding

analog audio to the HDMI stream. Likewise, the audio

connectors next to the output ports can provide de

embedded audio for amplifiers and audio systems.
Advanced EDID Management

The user can emulate any EDID on the inputs independently,

read out and store any attached monitor's EDID in 100

internal memory locations, upload and download EDID

files using Lightware Device Controller software.

Pixel Accurate Reclocking

Each output has a clean, jitter free signal, eliminating

signal instability and distortion caused by long cables

or connector reflections.

1.1.

Description

The MX2-8x8-HDMI20-Audio is the first Lightware HDMI2.0 standalone

matrix switcher that supports uncompromised 4K UHD resolution

at 60Hz 4:4:4. Thanks to its compact size and silent design, it is

particularly suitable for offices and meeting rooms, for 4K live events,

and for futureproof operation centers. It is also a perfect choice for

home theater enthusiasts who demand the highest quality along with

HDMI2.0 and 4K@60Hz video signals.
This flagship product has 8 HDMI2.0 inputs and 8 HDMI2.0 outputs

transmitting up to 4K at 60Hz in 4:4:4 format, while supporting 3D,

Dolby TrueHD, and DTS-HD Master Audio. Each input port has audio

connectors for embedding analog audio into the HDMI stream.

Likewise, the audio connectors next to the output ports can provide

de-embedded audio* for amplifiers and audio systems.

* Please note that only stereo LPCM can be de-embedded from the

HDMI signal.

Model Denomination

1.2.

Box Contents

MX2-8x8-HDMI20-AUDIO

8 input and

8 output ports

New generation of

Lightware matrix switchers

HDMI 2.0

compatible

Digital audio embedding

and de-embedding function

Matrix switcher

IEC power cable

LAN cross-link cable,

CAT5e type, 3m length



 



Содержание MX2-8X8-HDMI20-AUDIO









































































Результаты поиска

Содержание MX2-8X8-HDMI20-AUDIO

Отзывы:

Похожие инструкции для MX2-8X8-HDMI20-AUDIO

Бренды по названию

Популярные бренды

Lightware MX2-8X8-HDMI20-AUDIO, Руководство пользователя

Результаты поиска

Содержание MX2-8X8-HDMI20-AUDIO

Отзывы:

Похожие инструкции для MX2-8X8-HDMI20-AUDIO

Бренды по названию

Популярные бренды