Lightware MMX6x2-HT200, Руководство пользователя

Страница: 39 / 91

5. Software Control – Lightware Device Controller MMX6x2-HT series – User's Manual 39
Description Function
ID Code number.
Name You can give an unique name for the desired code.
Fingerprint (hash) Fingerprint code in pronto hexa format.
Detected Indicator gives feedback about the given IR code is detected currently.
Repeat timeout (ms) You can set a timeout to avoid the involuntary code recurrence.
Actions
Action buttons for the desired IR code:
Save
: saving the fingerprint.
Cancel
: canceling the fingerprint.
Learn
: learning the detected IR code.
Detected IR fingerprints
You can check the detected IR codes in this panel. Pushing
Clear
button
deleting all current fingerprints and switch on or off the automatic
scrolling with the
Autoscroll
pipe.
80 fingerprints can be stored in the device at the same time. Each of them can be ordered to an action in
Event Manager. For more details about events see Event Manager section.
Learning IR Codes
Step 1.
Connect the IR detector unit to the IR IN port of the receiver.
Step 2.
Click on the
Learn
button.
Step 3.
Turn the remote controller to the IR detector. A pop-up window appears in LDC - press your remote
button to learn.
Step 4.
Once the code is received, a new window pops up in LDC - learning completed. Click
OK
to continue.
Step 5.
Optionally type a unique name for the code in the
Name
text box. The default name is code#, e.g.
code0.
Ports
User can set the name and command injection port to each sources and destinations. For more details
about IR interface see the IR Interface section.
Infra tab - Ports window
Clear all IR codes
Clicking on the button results deleting all stored IR fingerprints.
  
