Always observe the following safety precautions when operating the LW24/C. Failure to comply with these precautions
or specific warnings given in this product guide violates the safety standards of the intended use for the sensor and
may damage the sensor. LightWare LLC assumes no liability for failure to comply with these requirements.
The LW24/C is not field serviceable. For any repairs, the equipment should be completely isolated, removed then
packaged carefully. Please visit LightWare LLC’s
for Return Merchandise Authorization (RMA) details, or
contact
Laser eye safety
The LW24/C emits ionizing laser radiation. The level of the laser emission is Class 1M which indicates that the laser
beam is safe to look at with the unaided eye, but must not be viewed using binoculars or other optical devices.
Notwithstanding the safety rating, avoid looking into the beam and switch the unit off when working in the area.
The laser eye safety rating depends on the mechanical integrity of the optics and electronics, if these are damaged do
not continue using the LW24/C.
Laser emitting lens
The LW24/C is rated laser Class 1M eye safe. Class 1M laser is safe for all conditions of use however it is not safe to
view the laser through magnifying optics such as microscopes, binoculars, or telescopes.
The use of optical instruments with this product will increase eye hazard.
Class 1M laser radiation label
LW24/C/SI microLiDAR™ sensor - Product guide
|
Version 0
|
03 March 2022
Page
18
of
36
