Take note:
●
Make sure the LW24/C is securely mounted to prevent false readings or damage.
●
Allow for proper ventilation.
●
Secure the communication cable to prevent it from pulling on the connector.
Ensure that nothing is in the path of the laser beam. Ensure that no shiny or highly reflective surfaces are near the path
of the beam.
Operating concepts
Distance measuring
The LW24/C is a single point distance measuring LiDAR. It uses time of flight technology to determine the distance of a
target at a configurable update rate of 48 Hz to 388 Hz.
The LW24/C can be connected to a host controller with the serial or I2C interface. The serial port (3.3 V logic level, 5 V
tolerant) has a configurable baud rate. The I2C serial bus (3.3 V logic level and 3.3 k pull up resistors, 5 V tolerant) has a
configurable address and is an alternative to the serial port when multiple devices are connected on a common bus.
LightWare Studio showing measurements from the LW24/C
LW24/C/SI microLiDAR™ sensor - Product guide
|
Version 0
|
03 March 2022
Page
15
of
36
