9
Lightware L-1020 Projector User’s Guide
Powering up the Projector
Be sure the projector is properly connected to power and the projector
is in the
Sleep state*.
Press the
Power On/Standby button and the projector will enter the
Live state* with the lamp on and the fan at high speed. (The lamp
takes approximately 30 seconds to reach full brightness.)
The projector uses a group of default settings at startup. These
default settings can be modified through choices made in the menus.
See page17
Menus.
The default settings provide an on-screen Startup logo for the first five
seconds and then select the data input source. If no data source is
present the projector will select a video player input source. If no
input source is detected, the image projected will default to the Startup
logo. If no Startup logo was selected in the features menu then the
screen will be blank.
Caution: Ultra High Pressure lamps need to be in a stable condition
prior to turning them on or off. To protect the lamp and the
projector, Lightware has designed protective delays into the
power up and power down circuitry. After first turning on the
lamp, a 30 second timer prevents prematurely turning it off. After
turning off the lamp, a 60 second timer prevents turning it on
prematurely. Please do not attempt to bypass these delays.
*for more information on the operational states of the L-1020, see
Operational States on page A-4 in the appendix.
Tip:
If you are connected to a laptop and are not projecting an image you
may have not properly activated the external video output port. See
Laptop External Video Port Activation on page A-15 in the appen-
dix.
This chapter describes how to operate your projector. It includes informa-
tion on how to adjust the projector, use the remote control, and how to
access and use the on-screen menus.
Operating the Projector
