6.LW2Programmers'Reference
HDMI-TPS-RX110AY series – User's Manual
56
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
6.4.
Port Settings
6.4.1.
Mute Output
INFO:
<A/V/AV>optionusuallycanbeskippedforlegacypurposes.Inthiscase,thedeviceschangeall
(Video&Audio)layersbutusingstatuscommandsitdisplaysinformationaboutonlytheVideolayer.
PleaseuseAVoption,whenavailable.
Command and Response
#mute
ȩ
{#
<out>
·
<layer>
}
Ȩ
(1MT
<out>
·
<layer>
)CrLf
Parameters
Identifier
Parameter description
Value
Parameter value
<layer>
The layer of the HDMI signal
A
Audio layer
V
Videolayer
AV
Audio and video layers together
Example
ȩ
{#2 A}
Ȩ
(1MT02 A)
Explanation
The audio signal of the Analog audio out (02) is muted.
ATTENTION!
Muting does not change the state of the crosspoint but disables the output itself. This way
the last connection can be easily restored with an unmute command. Switching a muted output does not
unmute the output.
6.4.2.
Unmute Output
Command and Response
#unmute
ȩ
{+
<out>
·
<layer>
}
Ȩ
(0MT
<out>
·
<layer>
)CrLf
Parameters
Identifier
Parameter description
Value
Parameter value
<layer>
The layer of the HDMI signal
A
Audio layer
V
Videolayer
AV
Audio and video layers together
Example
ȩ
{+1}
Ȩ
(0MT01)
Explanation
The audio and video signals of the HDMI out (01) is unmuted.
INFO:
Unmuting an output makes the previous connection active as the crosspoint state has not been
changed by the muting command, only the output was disabled.
6.4.3.
Lock Output
Lockanoutputport.Thestateoftheoutputcannotbechangeduntilunlocking.
Command and Response
#lock
ȩ
{#>
<out>
·
<layer>
}
Ȩ
(1LO
<out>
·
<layer>
)CrLf
Parameters
Identifier
Parameter description
Value
Parameter value
<layer>
The layer of the HDMI signal
A
Audio layer
V
Videolayer
AV
Audio and video layers together
Example
ȩ
{#>1V}
Ȩ
(1LO01V)
Explanation
The video signal of the HDMI out (01) is locked.
