Lightware 91540021, Руководство пользователя

Страница: 53 / 119

6.LW2Programmers'Reference HDMI-TPS-RX110AY series – User's Manual 53
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
6.1. LW2 Protocol Description
The device accepts commands surrounded by curly brackets - { } - and responds data surrounded by round
brackets - ( ) - only if a command was successfully executed.
Format Explanation
<in> Input number in 1 or 2 digit ASCII format (01, 5, 07, 16, etc.)
<out> Output number in 1 or 2 digit ASCII format
<in
2
> Input number in 2 digit ASCII format (01, 02, 10, 12 etc.)
<out
2
> Output number in 2 digit ASCII format (01, 02, 10, 12 etc.)
<loc> Locationnumberin1,2or3digitASCIIformat
<id> id number in 1 or 2 digit ASCII format
<id²> id number in 2 digit ASCII format
CrLf Carriagereturn,Linefeed(0x0D,0x0A)
· Space character (0x20)

Each command issued by the controller

Each response received from the router
6.2. Instructions for the Terminal Application Usage
Terminal Application
TheLW2protocolcommandscanbeappliedtothe
receiver using a terminal application. You need to
install one of them to your control device, for example
Putty
or
CLI
. #terminal
Establishing Connection
Follow the steps for establishing connection to the
receiver:
Step 1.
ConnectthereceivertoaLANoverEthernet
(see the details in the Connecting Steps
section).
Step 2.
Open the terminal application (e.g. Putty).
Step 3.
Add the
IP address
 of the device (default:
192.168.0.100) and the
port number (10001)
.
Step 4.
Select the
Raw
connection type, and open the
connection.
Oncetheterminalwindowisopened,youcanentertheLW2protocolcommandswhicharelistedinthe
following sections.
LW2 protocol command communication in a terminal window
  
