Lightspeed Zulu H-Mod, Руководство пользователя

Страница: 6 / 24

Fit
The Zulu H-Mod ANR kit is optimized to deliver
clarity and quieting with comfort. Contrary to most
in-helmet passive systems, this ANR kit does not
need significant pressure to ensure quieting.
For adjustments in fitting, you should refer to the
helmet dealer who provided the certified installation
of your Zulu H-Mod ANR kit. The fitting instructions
for each helmet will vary considerably.
Getting Started
4
Battery Installation
The standard Zulu H-Mod requires two
AA batteries (included). Use alkaline batteries
for best performance.
A. Open the controller battery/DIP switch door
by either pressing down on the circle icon or
by pulling open the door along the notched
edges. Insert two AA batteries with the correct
polarity positioning.
B. The LED flashes GREEN when charged batteries
are in use and the power is on.
C. When batteries begin to run low the power LED
flashes RED. If the LED flashes RED during flight
the headset will continue to operate for 5–10
more hours. Install new batteries as soon as
possible at any indication of low batteries.