Lightspeed Zulu H-Mod, Руководство пользователя

Страница: 14 / 24

Using Devices Enabled by Bluetooth Technology
12
Connecting to Mobile Devices for the First Time
The Bluetooth interface allows cell phone and stereo
music streaming capability (A2DP). Before using a
mobile phone for the first time with Zulu H-Mod,
it must be “paired” or electronically connected via
Bluetooth wireless technology.
To pair a mobile phone or device:
1. Turn on the system and verify the GREEN LED
is flashing. Make sure the Bluetooth mode is
turned
OFF
. (See “Bluetooth Mode—ON and
OFF”, page 13).
2. Press and hold the Bluetooth button for about
five to ten seconds or until the Bluetooth LED
continually flashes RED and BLUE . This indicates
the pairing mode setting and lasts about
two minutes. If this step takes longer and the
Bluetooth LED is no longer alternating RED and
BLUE, start over from step one.
3. In pairing mode, follow the menu prompts on
your Bluetooth wireless technology enabled
device directing it to look for other Bluetooth
wireless technology enabled devices.
4. Select Lightspeed-V### (numbers may vary) on your
mobile device from the list of found devices.
5. If asked to enter a password or PIN, enter 0000.
Your mobile device should now be paired and ready
for continued use.
When you turn on Bluetooth mode again, it will
connect to the most recently paired device. Most
mobile devices connect automatically. If that doesn’t
happen it may be necessary to use the settings