background image

SAFETY INSTRUCTIONS

1. Read Instructions—

All the safety  

  and operation instructions should  
  be read before this LightSPEED    
  product is operated.

 

2. Retain Instructions—

The safety and  

  operating instructions should be   
  kept for future reference.

3. Heed Warning—

All warnings on 

  this LightSPEED product and in 
  these instructions should be  
  followed.

4. Follow Instructions—

All operating 

  and other instructions should be 
  followed.

5. Water and Moisture—

This Light-  

  SPEED product should not be used 
  near water.

6. Heat—

This LightSPEED product 

  should be situated away from heat  
  sources such as radiators, etc.

7. Power Sources—

This LightSPEED 

  product should be connected to a  
  power supply only of the type  
  described in these operation  
  instructions or as marked on this 
  LightSPEED product.

8. Power Cord Protection—

Power supply 

  cords should be routed so that 
  they are not likely to be walked upon 
  or pinched by items placed upon or 
  against them.

9. Object and Liquid Entry—

Care should 

  be taken so that objects do not fall 
  onto and liquids are not spilled into 
  the inside of this LightSPEED product.

0. Damage Requiring Service—

This 

  LightSPEED product should be  

  serviced only by qualified service  

  personnel. The user should not  
  attempt to service this LightSPEED 
  product.

1. Prevent Electric Shock—

do not use 

  this polarized plug with an extension 
  cord, receptacle or other outlet  
  unless the blades can be fully  
  inserted to prevent blade exposure.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK  

DO NOT REMOVE COVER (OR BACK)  

NO USER-SERVICEABLE PARTS INSIDE  

REFER SERVICING TO QUALIFIED PERSONNEL

The lightning flash with arrowhead symbol 
within an equilateral triangle is intended to alert 
the user to the presence of uninsulated “danger

-

ous voltage” within the product’s enclosure, that 
may be sufficient magnitude to constitute a risk 
of electric shock.

The exclamation point within an equilateral 
triangle is intended to alert the user to the pres

-

ence of important operating and maintenance 
(servicing) instructions in the literature accom

-

panying the appliance

.

1

1

i | 800iX User Manual

8 0 0 i X   U s e r   M a n u a l

8 0 0 i X   U s e r   M a n u a l

800iX User Manual | ii

CH  

B

OFF

ON

TURN ON THE 800iX

TURN ON THE LIGHTMIC

CHARGE BATTERIES

Turn

 the microphone ON using  

the ON/OFF switch on the side of  

the LightMic and speak normally.

Plug

 the LightMic to into the charging 

cable to recharge at the end of the day.

DAILY USE INSTRUCTIONS

Unplug 

the LightMic from the  

charging cable and place it around  
your neck. Adjust the neck strap so  
the top of the microphone rests just  
below your collarbone.

POSITION THE LIGHTMIC

2.06/2.54

AUDIO OUTPUT

DC POWER

16V/1A

CHARGE

LEVEL

MIC LINE

CHANNEL A

CHANNEL B

SENSOR INPUTS

SHORT

BALANCED

AUDIO 

OUTPUTS

+

LT-71

LT-71

2.06/2.54

AUDIO OUTPUT

DC POWER

16V/1A

CHARGE

LEVEL

MIC LINE

CHANNEL A

CHANNEL B

SENSOR INPUTS

SHORT

BALANCED

AUDIO 

OUTPUTS

+

LT-71

Содержание 800iX






















Отзывы: