LightSpeed Technologies 705iR, Руководство пользователя

Страница: 14 / 36

14
1. Overview
2. Setup & Use
3. Optional
Accessories
4. T
roubleshooting
5. W
arranty
, Safety
& Specifications
4. OPERATING THE REDMIKE
Once the REDMIKE is charged, follow these steps to set it up for use.
1. Turn the 705iR power switch to the
on position. The red LED on the
switch will glow.
2. Turn on the REDMIKE. The red
IR LED on the 705iR will light to
indicate a signal is being received.
3. Slip the REDMIKE with lanyard
around the neck and position the
top of the microphone just below
the collarbone. NOTE: Positioning
of the REDMIKE is critical for
proper volume adjustment.
4. While speaking in a normal voice
slowly increase the volume of the
corresponding channel on the
705iR until your voice is barely
audible.
REMEMBER: This equipment
supplements the user’s voice
so they are able to speak in a
conversational tone. Having the
volume set too high will result in
feedback and listener fatigue.
5. Once initial volume level is set,
walk around the room and listen
for audio dropout and overall
audio quality.
Fine-tuning the audio is
accomplished by making minor
adjustments to the BASS or
TREBLE knobs on the top of the
705iR.
6. If a second REDMIKE was
purchased, repeat steps 2-4.
NOTE: Each REDMIKE has its
channel pre-set to either A or B, as
indicated on the back of the Mic.