LightSpeed Technologies 705iR, Руководство пользователя

Страница: 15 / 36

15
1. Overview
2. Setup & Use
3. Optional
Accessories
4. T
roubleshooting
5. W
arranty
, Safety
& Specifications
OUTPUT TO PERSONAL FM TRANSMITTER
1. Using a cable with a 3.5 mm
connector at one end, connect
the AUX OUT of the 705iR to the
input jack of the FM transmitter.
Different manufacturers use
different size audio input jacks on
the transmitter. The Lightspeed
370T requires the MMC 3535
cable.
2. Connect a patch cable from the
AUX OUT jack on the top of the
705iR to the FM transmitter’s
microphone or AUX input jack.
3. Adjust the volume control on the
Personal FM receiver to maximum
output. NOTE! This is to set the
maximum allowable signal from
the 705iR.
4. With the 705iR and FM transmitter
turned on, speak into the
microphone and slowly adjust the
AUX OUT volume control until the
appropriate audio level is
achieved through the personal FM
system.
NOTE The optional LT71 can also
amplify external audio. Simply plug
the 3.5mm patch cable from the
audio source into the input labeled
“AUX IN” and adjust the volume of
the source to the desired sound level.
CH A
MASTER
CH B
VOLUME
AUX
IN
AUX
OUT
TREBLE BASS
LT-71